by Greg Fox and Eston Martz
P charts and U charts have been a valuable tool in the
quality engineer's toolbox for decades. But, as David Laney found out, when
sample sizes are very large, the control limits become too narrow and the data
can spill out over the control limits.
Where some saw chaos, Laney was inspired
to put the teachings of Fisher, Deming, Wheeler, and others to bear on the
problem and ended up changing how we think about P charts and U charts.
We recently had a chance to talk with Mr.
Laney about his inspirations and about Minitab’s new features, the P’ Charts and
U’ Charts that bear his name.
Minitab: You introduced the Laney P’ and U’ charts in a
2002 paper. In a nutshell, what are they for and what is innovative about
Laney: What they’re for is to correct an inherent error in
the P chart and the U chart, which are—in a word—wrong. They’re wrong
because they assume that all the variation in the entire process is
within-subgroup variation, or sampling variation.
It’s important to not blindly look at a control chart whose limits are very
close together, and with data all over the page and say, “We’ve got utter chaos
here.” No, you don’t. What you’ve got is a lot of variation between
subgroups. This variation is not explained by the binomial or Poisson
assumptions alone, yet needs to be accounted for. That’s what the P’ and U’
Minitab: What got you thinking about these issues with
the P and U charts?
So I looked at the chart for this project. It was a P chart, but the upper
and lower control limits were about a millimeter apart. And the data were all
over the page. This was the first time I ever saw that. I said, “Now, how is it
possible for every point to be out of control?” So I went to the AT&T
handbook and looked it up, and learned that yeah, this can happen when you've
got large, large samples.
Minitab: That’s called overdispersion?
Minitab: When you say XmR chart, just for clarification,
it’s what we call an I-MR chart in Minitab?
Dr. Shewhart taught us that short-term variation is the key. Because if you
use long-term variation you may be allowing trend and seasonality to interfere
with your attempt to differentiate between special causes and common causes.
Not long after the 911 project, I was in Knoxville, Tennessee, sitting in a
hotel conference room listening to Dr. Don Wheeler. He was talking about
analysis of variance, detecting the difference among several means, and so on.
Well what does that use? That uses the principles introduced by Fisher -- a
comparison of within-group variation and between-group variation. And it makes a
careful distinction between those two in order to assess what’s going on. Where
does the P chart do that? The P chart doesn’t do that.
Minitab: Why should the P chart do
I got to thinking about all this. What bothered me about using the I-MR chart
shortcut was that its control limits were, by definition, flat -- despite the
substantial difference in sample sizes from month to month. The number of calls
to 911 in Florida tend to be very high in the summer, when there are more cases
of heat-related illness. There are fewer calls in the winter. Well, larger
subgroups mean more statistical certainty. We would expect a P chart, with
varying sample sizes, to have "wiggly" control limits, with wider limits for
smaller subgroups and narrower limits for larger subgroups, right?
Minitab: A Z chart has wiggly control limits?
zi = pi – pbar / Sigma of
zi = pi – pbar / Sigma of
where zi is the z-value for a subgroup, pi is the
proportion of defectives for that subgroup, pbar is the average proportion of
defectives. Sigma of pi is the standard error for the subgroup.
The control limits on the Z chart are always straight, but Sigma of
pi is smaller for larger subgroups. For the same pi, a
large subgroup size will cause zi to be farther from the center line,
which is always at zero. So in both the P chart and the Z chart, extreme values
for the proportion of defectives are more likely to fall outside of the control
limits if they occur in larger subgroups.
Now, in the classical Z chart we know that 3 standard deviations encompass
99.73 % of the data so therefore we’re going to set our control limits at +/-3.
Right? No we’re not! Because I remember what Wheeler said, “Why
assume the variation when you can measure it?”
Why would we sit there and just blindly assume, “Well, the upper limit must
be 3.” Why don’t we use moving ranges of size 2, like the I-MR chart does, and
find out what it is?
So I came up with what I called the Z’ chart. I didn’t know what else to call
it. I wanted it to have a DNA linkage to the Z chart, but I wanted it to be
sufficiently different. I used the moving ranges of size 2 to estimate the
standard deviation of the z-scores, and called that “Sigma Z”. Then I set my
control limits at +/-3 times Sigma Z.
Minitab: Did the 911 data look different on the Z’
So we started using the Z’ chart with great success, but then, as you might
suspect, a number of our clients would say, “What’s a Z? What does this
So now we have a new problem. I’ve got something that I know is right, but I
can’t sell it because nobody can spell it; "lay" people can't seem to twist
their thinking around into the Z-plane and understand what’s going on.
The solution was to convert the Z data back into P data, to turn it into a
type of P chart again.
Minitab: A P’ chart?
+/- 3 x Sigma of pi
+/- 3 x Sigma of pi
In a P’ chart the control limits are:
+/- 3 x Sigma of pi x Sigma Z
+/- 3 x Sigma of pi x Sigma Z
Now I had a chart that showed the actual recorded proportions of defectives,
rather than contrived z-values. So we had something that worked and was easy for
everybody to understand.
One of the first people I told about this was Forrest Breyfogle, who’d
invited me to attend his new Advanced Black Belt course. On the side, I told him
about what I had just discovered, and he was very interested. I mean, I could
tell he was struck by this simple but incredibly powerful concept, because it
was correcting something that had been an issue for 70 years.
Not long after that, out came a fabulous book called Implementing Six
Sigma, by Forrest W. Breyfogle. And on page 177 he gave me credit for
inventing the new Z' chart, which he called the "Z&MR chart" He didn’t take
it all the way back to the P’ chart. Ever since, a growing number of people have
become early adopters of this method.
Minitab: Of the P’ chart?
People kept bugging me, saying, “You know, you really ought to write this
up.” Well, I’m not in academia. I don’t publish or perish. But I had about 30
years’ service in industry by that time and I was looking at what to do next. So
I wrote an article and sent it in to Quality Engineering. They
published it in 2002, just one month before I left BellSouth and started
teaching at Samford University.
Minitab: Clearly, they saw a lot of value in what you
Minitab: Have there been any reservations about using
Minitab: How does that play out in a practical
Minitab: Yes, the P Chart Diagnostic.
Laney: If your data do not overwhelmingly argue in
favor of the P’ chart, then the diagnostic says you can use the P chart. But why
would you want to settle for that? For example, suppose a Sigma Z of 1.20
doesn’t trip your test. Why would you want to use the P chart when
there is arguably 20% more variability in your data than the binomial can
predict? You can end up dealing with more false alarms just because the
diagnostic test has a low alpha and wants to be convinced beyond a shadow of a
doubt before it recommends the P’ chart.
Even if Sigma Z is 1.01, I’d still rather use the P’ chart! Why wouldn’t you?
Now that Minitab is doing the calculations for you, it’s just as easy to click
on P’ chart as it is on P chart. Now, the P’ chart won’t make any noticeable
difference if Sigma Z really is 1.01 But again, “Why assume the variation when
you can measure it?” I would also say, “Why do your analysis in a way that
could be wrong when you could do it in a way that’s always
right?” Then you don’t have to worry about the diagnostic test.
There are going to be people who are hard to change, skeptics. Deming said
that change occurs on a generational basis. That’s why it was good that he lived
to be in his 90s so he could actually see some change taking place in this
world. We don’t change quickly, so after 70 years of using a P chart there are
going to be people who don’t necessarily understand or believe that the P’ chart
is better. I’ll be happy knowing that if they at least run your test, and let
that tell them they should be using the P’ chart, then they’ll use it and save
themselves a whole lot of unnecessary busy work chasing false alarms.
Minitab: The P’ chart and U’ chart seem like powerful
and versatile tools. And it’s no small feat to come up with such an elegant
solution to a problem that has plagued the quality community for
Minitab: Are there any conditions under which you would
not want to use the P’ chart instead of the P chart?
Laney: No. Categorically, positively, no. For the same
reason I brought up before: there’s no such thing in the real world as a perfect
normal, binomial, or Poisson distribution. In the same spirit that a
statistician can reasonably say that the normal assumption is always wrong, we
can quote George E.P. Box: “All models are wrong. Some models are useful.” And I
would be willing to stake my reputation on the statement, “The blind reliance on
the binomial or Poisson distribution embodied in classical attributes control
charts is also always wrong.” Because there is variation in
everything. Say, isn’t that Chapter 1, Page 1 of every SPC text—“There
is variation in everything”?
The binomial assumption is never, ever exactly right. So why would you not
want at least the slightest little nudge in the right direction?
Part of me still laments that when the time comes that I’m down there smiling
up at everybody…I got that from George Carlin …there will always be a bit of
regret that in my lifetime there was never a time that everybody just
automatically used the P’ chart and the U’ chart.
Minitab: We couldn’t help but notice that when you wrote
your Quality Digest article, you closed by saying “My life’s goal is to get this
From now on I can point to this day on the calendar and say “There, right
there, is where it changed.” And I can’t tell you how happy that makes me.
Because now I don’t have to push anymore. With Minitab taking over the reins of
this stagecoach, I know that the strongbox is going to be delivered.
*See Minitab’s Methods and Formulas Help for more details about these
免费获得每月电子新闻简报，其中包含最新 Minitab 新闻、教程、案例研究、统计提示和其他有用信息。
使用此网站，即表示您同意对数据分析和个性化内容使用 Cookie。 请阅读我们的政策