This article by Paul Sheehy, technical training specialist, Minitab.
Inc., discusses the differences in how Six Sigma Green and Black Belts are
taught statistics in different organizations, and identifies seven
ways statistical software can help support quality professionals.
Different organizations teach statistics to their Six Sigma Belts at
significantly different levels of scope and depth. I have seen many Master Black
Belts (MBBs) who were highly qualified practical statisticians and a few who did
not know the difference between a 2-sample t-test and a paired t-test. Black
Belts (BBs) in general are taught statistics at a less intensive level, because
they can lean on their MBBs for help. However, it is the Green Belts (GBs)
and—if I may coin the term—base-level BBs who seem to exhibit the most variation
in statistical knowledge.
It’s important to note that many organizations believe in a standard body of
knowledge that all BBs should master. This concept of a certified professional
BB is valid, but we are now focused on GBs and base-level BBs. The toolkit
taught to these people might be more appropriately linked to their specific
field, factory, or office. If no one in the organization uses certain tools,
they may be “nice” to teach but doing so is likely a “waste of
Some organizations teach GBs to the same level as BBs. The rationale is that
both need the same toolkit, because the main difference between a GB and BB in
these organizations is that one works projects part-time and the other
full-time. Other organizations treat GBs as simple team members. These GBs learn
the importance of data and the concept of Analyze and Control, but they may not
be permitted access to statistical packages. This last approach, unfortunately,
has a logical basis: statistics can be complicated; it has a “use it or lose
it” factor; and it can be dangerous in improperly trained hands. Potential
danger lurks in selecting an improper tool, using tests without verifying
assumptions, using insufficient sample sizes, using data that isn’t trustworthy,
or simply misinterpreting the analysis.
What are some possible solutions?
First, statistical software companies should recognize the fact that most of
their users are not statisticians, and their software should provide for input
and output in clear English (or French, or Chinese). Consider the adage that “If
your only tool is a sledge, then every problem looks like a spike.” Simply put,
software should provide a basic toolkit to a GB and an advanced one to a MBB,
and it must be comfortable for either user. Ideally, you want one software
package suitable for both beginner and expert. This has two clear advantages.
First, as the GBs progress to become BBs and perhaps even MBBs, the tool they
use remains consistent. In addition, MBBs use the same tool whether doing an
advanced analysis or assisting a GB.
Second, software should, wherever possible, automatically validate
assumptions and provide clear warnings in easily understandable language when
providing statistical results. For GBs, I am uncomfortable both with output that
provides no checking of assumptions (with the expectation that the user knows
how to and actually does validate all assumptions) as well as “Black Boxes” that
give “THE” answer without reporting on data quantity and quality, and the status
of the assumptions.
Third, software should guide or, even better, semi-automatically lead the GBs
through a logical sequence of actions that result in a proper analysis. This
sequence should consist of data validation, critical graphical analysis,
assistance in choosing the appropriate statistical analysis, and a crisp
conclusion drawn from a properly executed statistical procedure.
Fourth, software for GBs should use tests that are robust to common
assumptions and provide statistical clarity. Here are four examples:
Fifth, training should avoid “stat speak” except where critical. We should
also understand that participants in a typical two-week GB training or even a
four-week BB class need to learn a tremendous amount of Six Sigma theory and the
use of many different soft tools so they can complete projects. Devoting
adequate time to these topics typically leaves insufficient time to comfortably
teach statistics and supporting statistical software. As a MBB, I spent 7 years
instructing BBs and GBs, and was always stretching to cover the concepts of Lean
Six Sigma, change management, project management and reporting, project
selection and scoping, financial analysis and reporting, in addition to
conducting in-class project reviews and coaching. I felt unable to provide
proper statistical training and practice.
As a Minitab instructor for the past 6 years, I have found myself on the
other side of the issue. About 40% of students in my Minitab classes have
served as Belts or are being trained as Belts. In almost every class I hear
someone say, “Gee, I didn’t learn that in my Six Sigma class.” I always respond
that, given the time allowed, the Six Sigma instructor can only teach the
basics. We do not consider a Belt’s Lean Six Sigma skills to be complete at the
end of a few weeks of training; rather, we wait until they have time to apply
and improve those skills over a period of time—typically a year and/or several
completed, juried projects. Why do we then assume all statistical training is
complete and mastered in initial training? Statistical knowledge, like most
other Lean Six Sigma components, must be nurtured and augmented over that first
Sixth, we should teach to the right level. One size does not fit all. I have
been in many service organizations that do not use traditional continuous gages
and thus have no reason to use a traditional Gage R&R analysis. Why teach
it? On the other side of the coin, I was teaching Lean Six Sigma to a service
organization and they said they did not see the value in learning DOE. I
convinced them that while they were correct in that we should not spend three
days on DOE instruction and practice as called for in their organization’s
manufacturing group’s training material, we should do a 3- to 4-hour “awareness”
training so that the class would have knowledge that the tool exists, what it
can do, and its basic requirements. They agreed, and later 2 of the 25 attendees
appropriately used simple 2K DOEs in their first project.
Seventh, we should provide ongoing support to Belts. This should include
training on how to access help functionality in the software they use. This is a
basic tool but one that is frequently ignored. The first line of action for any
Belt who is stuck should be to use in-software help.
I will close with an observation: Statistics is the heart of Lean Six Sigma,
but it is not the activity to which a Belt devotes the most time. During a
project that spans three or four calendar months, a Belt may use a
statistics/data package for 10 to 20 hours. However, statistics is a crucial
tool—for without it, how would we quantify our baseline capability and verify
that it comes from a stable process? How would we know if a change was
statistically valid or due to random chance, and how would we properly quantify
our final state?
Statistics is required—conference sessions proclaiming “Six Sigma without
Statistics” notwithstanding—but it should and can be made more accessible,
easier to learn, and safer.
Paul Sheehy is a technical training specialist at Minitab, LLC. He earned
bachelor's degrees in both industrial technology and mechanical engineering
while employed at General Electric, but believes that his most valuable training
came from learning and applying practical business statistics and continuous
process improvement in a real-world environment. After becoming a Master Black
Belt, he deployed the Six Sigma program at the GE Power Systems facility in
Bangor, Maine, and taught Six Sigma methodology at both user and "Train the
Trainer" levels at various GE locations. Before joining Minitab, Sheehy was a
master consultant and trainer at the Six Sigma Academy, where he developed
training material for Black Belt and Green Belt programs and trained Six Sigma
Black Belts at companies such as Ford, Visteon, Johnson Controls, Tyco, Kerr
McGee, and Lear. Sheehy has presented at multiple conferences and has delivered
several luncheon keynotes at the American Society for Quality’s Lean Six Sigma
Conference. He was lead author of the Black Belt Memory Jogger.
Download this article as a PDF.
In unserem kostenlosen monatlichen E-Newsletter finden Sie die aktuellen Neuigkeiten rund um Minitab, Lernprogramme, Fallstudien, Statistiktipps und weitere nützliche Informationen.
Durch Ihre Nutzung dieser Website stimmen Sie zu, dass Cookies verwendet werden. Cookies dienen zu Analysezwecken und zum Bereitstellen personalisierter Inhalte. Lesen Sie unsere Richtlinien